How to Remove a Large Tree--The Safe Way

Removing a large tree is a tricky job best left to the professionals. Here is how the experts at Blooma Tree Experts LLC removed a large Port Orford Cedar that was right next to a house.

Before and After:

The large Port Orford Cedar had grown too large for its space; the final cut.

Martin cuts this large limb on his way up the tree, after removing much of its foliage. Note the rope in the upper left side of the photo. It is tied onto the limb and put on a pulley which is higher in the tree. This way, the men on the ground can direct its downward movement.
Removing a large limb requires patience, strength, and know-how.

	Martin repeats this procedure all the way up the tree to its top, using ropes and pulleys to let each limb descend slowly to a specific spot. This customer has a formal landscape that must not be damaged, along with a balcony that is in harm's way. Lowering each limb is the only way to ensure no damage to the yard and property.
Limbing a tree the safe way.

Once the tree is fully limbed, Martin works his way down from the top, removing chunks as he descends. As you can see, this becomes quite challenging as the size of the trunk increases. Note how the large piece has ropes tied on so the men below can pull it onto a safe landing site, out of the way of the customer's precious plants.

The trunk is nearly as tall as Aaron.          Definitely the largest spider we've seen.

As you can see from these photos, removing a large tree is challenging, dangerous work best left to professionals. So much can go wrong if you don't know what you're doing. That's why the Blooma Tree Experts always have an ISA certified arborist in charge on every job, ensuring the safety of our crew and the safety of our customers.